HDPE, PP, PA6, non-woven fabric
Composite Drainage Mesh Mat
HDPE, PP, PA6, non-woven fabric
Product Introduction
This production line, based on existing 2D/3D drainage net equipment, soil and water protection blanket equipment, and W-type geomat equipment, adds double-sided/single-sided composite non-woven fabric equipment to produce composite drainage net mat products. It provides one-stop production of 2D/3D geogrid cores, soil and water protection blankets, W-type geomats, and double-sided non-woven fabric thermally composite finished products, collectively known in the industry as composite drainage nets or drainage mats. The raw material is primarily HDPE polyethylene, and the entire process involves glue-free thermal bonding. It is suitable for landfill, tunnel, garage roof, and roadbed drainage projects. The entire line is automated and continuous, requiring only one person to operate.
Technical Parameters
Model | JG-YZW65H | JG-YZW90 | JG-YZW120 | JG-YZW150 | |
Extruder | Φ65/28 | Φ90/25 | Φ120/25 | Φ150/25 | |
Screw speed | r/min | 5-40 | 5-30 | 5-25 | 5-20 |
Width of product | mm | 2000 | 2500 | 3000 | 4000 |
Installed capacity(approx) | KW | 60 | 86 | 180 | 220 |
Application Scope
Sponge city, rain garden, permeable pavement with bottom layer water diversion, three-dimensional support with large cavity, strong pressure bearing, bidirectional drainage, suitable for heavy loads and long-distance drainage, covering the vast majority of geotechnical drainage projects.
Inquire Now